Community Edition 20.9

🎯 Major Features

• r10477: Improved discovery neighbours. Added autodiscovery table for check already discovered (by remote protocols) remote hosts. Prevent autodiscover already known and unavialable remote hosts. Added information when neighbour last changed and remote host checked. Currently fully implemented for MIKROTIK-MIB, partially for LLDP-MIB. +1,238/−491
• r10526: Improved polling Windows os by WMI module. Fixed polling storages by wmi (OBSENT-33). +516/−298
• r10706: Migrated alert notifications to common definitions. +1,082/−1,215

✨ New Features

• r10028: Add ArubaOS-CX +53/−2
• r10030: Add Alcatel new AOS ddm sensors +92/−2
• r10032: Add AVTech roomalert 3e sensors. +132/0
• r10033: Add HH3C stack status +18/0
• r10034: Add mem/cpu/port status for switch stacks from HP-STACK-MIB +21/0
• r10052: Add PoC probes system with support for check_snmp_cisco_wlc nagios plugin +1,206/−6
• r10056: Add statically defined sensors for those hard-to-reach devices +28/−7
• r10067: Add support for Extreme ERS/VSP transciever sensors [OBS-3112] +776/−1
• r10071: Add check_snmp_win probe and fix some probe bugs +455/−5
• r10077: Add some RA protocols to JunOS +1/0
• r10081: Add ability for defined graphs to be stepped. Fix probe graph stacking and make it stepped +6/−4
• r10091: Add epson print server OID to discovery +1/0
• r10095: Add some support for Ruijie +120/0
• r10103: Add entity endpoint. +21/0
• r10104: Add basic lantech support. +20/0
• r10105: Add setting of device ignore/disabled to api +13/0
• r10106: Improve API slightly. Strip device entity secure data from /entity/ endpoint. +11/−7
• r10127: Add a couple of probe definitions. +10/0
• r10129: Add polling for services on windows via WMI. +175/−11
• r10141: Improve win services +119/−65
• r10142: Add probe edit modal +73/0
• r10267: Add Win2k Icon +2/−2
• r10273: Add roles +2,308/−1,267
• r10278: Add group attribute to bgp peers +3/−1
• r10282: Add message to probe alert metrics +1/−1
• r10293: Add ability to give write permission to a role for a group of devices. +108/−34
• r10297: Apply device write permissions to notes page +2/−2
• r10381: Add processor and memory pool endpoint to API. +72/−8
• r10416: Add Netscaler/F5 virtuals support to search box +89/−5
• r10433: Ignore MEMPOOL_GLOBAL_SHARED for cisco firepower / virtual ASA platforms. +1/0
• r10478: Add check_ping +13/−13
• r10494: Fix correct method of generating user lists +38/−11
• r10498: Add ability to use allow list for WMI discovery of windows services +36/−9
• r10536: Add entPhysicalClass to inventory query builder +4/0
• r10546: Add basic derpy dark mode support. +44/−15
• r10550: Automatically switch carto tiles to dark in dark mode +3/0
• r10650: Add some sorting to BGP table display +31/−2
• r10665: Add some probe defs +25/0
• r10668: Additional map tile options +15/−3
• r10670: Add additional theme options. +27/−19
• r10671: Addition for previous commit. +7/0
• r10672: Update font +322/0
• r10679: Add autoswitching light/dark carto basemaps type +12/−16

⚡ Improvements

• r10079: Probe improvements. Additional definitions. reset/no_default/descr added to db. +123/−37
• r10098: Improve some probe related pages. Disable monitored entity icons for status/sensors for now, they break the overview table layout. +56/−7
• r10274: Additional role support +221/−18
• r10471: Improve graph widget slightly +4/−4
• r10472: Improve dashboard graph widget slightly II +11/−10
• r10516: Some CSS cleanups
• r10530: CSS cleanups
• r10539: CSS cleanups
• r10547: CSS and sprite cleanups
• r10548: Improve some AJAX handling +25/0
• r10551: Minor improvements to dark mode +4/−4
• r10559: Change failed autodiscovery icon +4/−2
• r10622: Improve syslog output format slightly +7/−2
• r10674: Improve some graph rendering +142/−43
• r10685: Some graph style improvements +17/−18

🐛 Bug Fixes

• r10004: working IE compat js
• r10017: Fix ucd_ss_cpu graph +1/−2
• r10019: Add portInterfaceCard to allowed FRU types for juniper statuses +1/−1
• r10020: Add FPCs to allowed juniper status entries +1/−1
• r10022: Fix printersupplies device graph. +3/−1
• r10035: Remove snmp data from api calls below user level 7 +21/0
• r10037: Fix ddmPortTxOutputPower unit type. +1/−1
• r10040: Use rate as value for custom oids when type is counter +1/−1
• r10050: Fix custom oid alerting value passing. +2/−3
• r10054: Fix graph page add to dashboard menu generation. +4/−4
• r10058: Fix overwrite +2/−85
• r10059: Correctly pass device_id for probe addition +1/−1
• r10070: Don't overwrite cmd array +2/−1
• r10076: Fix snmp version arguments +2/−2
• r10097: Fix typo +2/−1
• r10122: Migrate pan-common-mib graphs to definitions. +20/−33
• r10196: Fix variable name for web ui config +1/−1
• r10220: Ignore disabled devices when generating front page status widget +1/−1
• r10275: Update navbar links +19/−8
• r10279: Remove dupe navbar add user option. 0/−4
• r10280: Fix permissions issue +11/−50
• r10294: Add form changes for entity permissions +5/−2
• r10321: sort overview ports by ifIndex +2/−1
• r10361: Switch billing accurate graph to use si prefixes +1/0
• r10363: Fix ACE poller RRD creation +2/−7
• r10397: Fix hidpi logo usage
• r10398: Fix brand css
• r10417: Minor API fixes +4/−16
• r10418: Cleanup old commented code. 0/−1
• r10419: Only show sensor limit changes if enabled. Spam reduction. +1/−1
• r10420: Header +3/−3
• r10485: Fix rancid script commit +2/−3
• r10493: Minor debug output +1/−1
• r10495: Fix role addition to work with non-MySQL auth schemes +38/−55
• r10496: Improve Role interaction with non-MySQL auth +27/−23
• r10499: Fix arptable permitted query generation +2/−2
• r10507: Set printer supplies to 80% when all the printer returns is "yeah there's some left lol", aka -3 +1/−1
• r10515: Add missing font +1/0
• r10527: Minor syntax fixes +13/−13
• r10528: Minor layout fix +2/−2
• r10529: Minor syntax fixes +3/−3
• r10531: Minor improvements +3/−27
• r10532: Minor fix +3/−3
• r10558: Fix neighbours page +19/−6
• r10587: Mitigate a possible CSS +11/−6
• r10588: Fix js derp
• r10623: Fix unhiding capability for snmpv3 usernames +2/−1
• r10624: Mitigate a jquery xss
• r10625: Clean up unused/broken graph widget method +5/−3
• r10627: Fix broken fix. +1/−1
• r10628: Fix some dashboard issues +366/−363
• r10629: Fix more dashboard issues +15/−21
• r10637: Remove unused code (V20) 0/−161
• r10638: Fix include variable checking (V14-19) +18/−7
• r10642: Fix some XSS with the graph browser (V13) +3/−3
• r10643: Fix missing escaping (V12) +1/−1
• r10669: Fix previous commit +1/−1
• r10675: Clean erroneous style from ports overview widget +2/−2
• r10676: Remove callouts use +1/−1
• r10684: Fix some minor CSS issues
• r10686: Fix inclusion issue +1/−1
• r10687: Clean erroneous hardcoded background 0/−1
• r10688: edit_widget perm check +4/0
• r10689: Remove duplicate return query +1/−1
• r10690: Clean up inventory api endpoint a little. +7/−16

🔧 Minor Changes

• r10048: Added support for WTI PDU devices (OBS-3073). +100/−12
• r10055: Minor improvements to probes. Split some code into includes. +98/0
• r10078: Added discovery sensors by CISCOSB-Physicaldescription-MIB and CISCOSB-SENSOR-MIB. +163/−4
• r10083: Added snmp flag for ability to fetch tables without indexes by snmpwalk_cache_oid() and snmp_walk_multipart_oid(). Added unit tests for this flag. +39/−34
• r10109: Improved mibs discovery, added ability for detect mib supported by definitions. +237/−205
• r10119: Change array format slightly +7/−7
• r10128: Fixed lost session on regenerate session id (OBS-3132, OBS-3109, OBS-3060). +118/−58
• r10157: Improved discovery ip addresses. Added discovery addresses by definitions. Added collect additional ip address fields (type, vrf if possible by mib). +1,129/−842
• r10158: Improved display and search ip-addresses. +104/−14
• r10162: Added support for Sophos SFOS (OBS-2553). +141/−19
• r10169: Make Proxmox agent script work on Proxmox 5 and newer as well +9/−2
• r10171: Added discovery/polling BGP peers by HUAWEI-BGP-VPN-MIB. Added polling afi/safi metrics by HUAWEI-BGP-VPN-MIB (OBS-2434). Added discovery ip-addresses by HUAWEI-IF-EXT-MIB. +668/−429
• r10176: Added basic detection for Transmode optical gear (OBS-3150). +86/−31
• r10178: Added support for CyberPower PDUs (OBS-3123). +410/−12
• r10192: Added support for SMC Switches (OBS-3162). +123/−1
• r10195: Improved discovery ServersCheck sensors (OBS-3160). +228/−64
• r10199: Added support for QNAP QES (OBS-3165). +238/−41
• r10203: Improved support for Lenovo System X by IMM-MIB (OBS-3167). +526/−215
• r10207: Improved support for APC ATS devices (OBS-3168). +444/−162
• r10209: Added support for Cisco APIC devices (OBS-3170). +35/−3
• r10211: Improved support for Edgecore ECS4110, ECS4120, ECS4510-MIB devices (OBS-3181). +471/−113
• r10215: Improved support for Edgecore AOS5810 (OBS-3180). +261/−6
• r10218: Improved support for ZTE ES devices. +339/−97
• r10235: Improved support for Zyxel IES/VES devices (OBS-3189, OBS-3190). +328/−70
• r10244: Improved support for NTI Enviromux 2D, 5D devices (OBS-3209). +697/0
• r10246: Added support for Cisco Industrial Ethernet Switches. +276/0
• r10256: Added support for Delta Orion Series Power devices (OBS-2596). +198/−5
• r10258: Improved support for Korenix JetNet devices. +357/−11
• r10265: Added support for MRV OptiDriver devices (OBS-3215). +411/−61
• r10266: Added support for MySQL connection with SSL (OBS-3221). +43/−1
• r10268: Cosmetic changes to WMI module +4/−2
• r10277: Improved support for Radware DefensePro (OBS-3220). +158/−21
• r10287: Added support for Cisco (Viptela) SD-WAN devices (OBS-3228). +266/−9
• r10289: Added discovery additional sensors and statuses for Dell PowerEdge devices by MIB-Dell-10892 and StorageManagement-MIB (OBS-3230). +298/−2
• r10308: Added support for RAD ETH devices (OBS-3204). +271/0
• r10311: Added support for Westermo devices (OBS-3234). +209/0
• r10313: Improved detect duplicated devices with non-fqdn sysname. Added function for compare Oids from two devices compare_devices_oids(). +213/−56
• r10317: Improved support for DCN IOS Switches. Added discovery sensors by DCN-MIB. +377/−9
• r10320: Improved support for Patton Smartnode (OBS-3234). +93/−15
• r10328: Improved support for Hikvision Cameras (OBS-3278). +72/−44
• r10331: Added basic support for Talari APN (OBS-3277). +117/−30
• r10333: Added DOM sensors discovery for (some) D-Link switches (OBS-3256). +159/−1
• r10334: Added basic support for Ethernet Direct switches (OBS-3279). +120/0
• r10351: Added ability for linkify ports in syslog messages. +100/−45
• r10353: Added ability for linkify bgp peers and astext in syslog messages. +45/−9
• r10357: Added support for FS.COM FIBERSTORE-MIB. Added support for multi-lane DOM sensors by FS-SWITCH-MIB/FIBERSTORE-MIB (OBS-3137). +206/−56
• r10367: Improved is_port_valid(), added ability for set ports ignore os definitions. Ignore Optics ports for Cisco IOS XR (OBS-3293). +155/−139
• r10374: Improved support for some Allied Telesys switches (OBS-3303, OBS-289). +602/−67
• r10379: Added support for Egnite Querx (OBS-3252). +158/0
• r10385: Improved support for Tripp Lite PowerAlert devices by TRIPPLITE-PRODUCTS (OBS-2419, OBS-3307). +395/−48
• r10386: Improved polling HPE ProLiant servers. Improved polling/discovery sensors by CPQSINFO-MIB, CPQHLTH-MIB, CPQIDA-MIB. +467/−166
• r10400: Added support for Sophos SFOS with new firmware 18.x by SFOS-FIREWALL-MIB (OBS-3322). +136/−15
• r10404: Added support for DOM sensors by TIMETRA-PORT-MIB (OBS-3324). +646/−23
• r10406: Added discovery DOM sensors by RADLAN-PHY-MIB (OBS-3326). +515/−88
• r10413: Added support for Sonicwall SMA (OBS-3275). +184/−37
• r10430: Added support for Tycon TPDIN Monitor (OBS-3340). +162/−8
• r10447: Added discovery DDM sensors by NETGEAR-BOXSERVICES-PRIVATE-MIB (for new fw version). +91/−3
• r10448: Fix Supermicro 'Chassis Intrusionsion' sensor name for new Supermicro agents +2/−2
• r10449: Added discovery airFlowSensor and thdSensor by VERTIV-BB-MIB (OBS-3351). +82/−2
• r10462: Added discovery PoE status and sensors by MIKROTIK-MIB. +106/−5
• r10465: Added detect LevelOne IP Cameras. +11/0
• r10475: Improved session_set_var() for use with nested keys. Added cache functions for fallback to session caching if fastcache disabled (need for some ajax queries). Fixed some cache warnings. +144/−32
• r10476: Added helper functions for search port/device by mac address. Added safe_ip_hostname_key() for get safe key from use in arrays by IP address. +114/−9
• r10488: Force self HEX to ASCII (UTF8) snmp values converting in some cases (ie sysLocation), for fix net-snmp utf8 issue. +60/−29
• r10501: Migrated discovery neighbours for LLDP-MIB. Fixed detect remote IP. Fixed issue OBS-3369. +124/−52
• r10509: Migrated discovery neighbours for CISCO-CDP-MIB. +91/−52
• r10511: Migrated discovery neighbours for ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB and ALCATEL-ENT1-INTERSWITCH-PROTOCOL-MIB. +160/−50
• r10513: Migrated discovery neighbours for FOUNDRY-SN-SWITCH-GROUP-MIB. +979/−965
• r10518: Migrated discovery neighbours for all variants of *-ISDP-MIB. +194/−270
• r10523: Migrated discovery neighbours for OSPF-MIB. +74/−14
• r10524: Migrated autodiscovery for BGP peers. +8/−1
• r10543: Added auth mechanism param for user roles and entities tables, for prevent user overlap when auth mechanism changed. +172/−100
• r10567: Added support for SmartOptics DCP (OBS-3394, OBS-3395). +154/−36
• r10586: Added support for Dantherm CC3000 (OBS-3392). +477/−8
• r10606: Added support for IBM Datapower Gateway (OBS-3417). +383/−5
• r10610: Added discovery dom sensors by NMS-IF-MIB (OBS-3400). +233/−90
• r10618: Added sensors discovery for Clavister cOS (OBS-3441). +75/−20
• r10621: Added support for Gude ATS3020RM (OBS-3442). +148/−18
• r10626: Update jQuery library to latest. +4/−2
• r10630: Update jQuery to latest compatible version (2.2.4). 0/−1
• r10644: Prevent pass any possible xss variables (V05-13). +6/−1
• r10646: Added support DDM sensors on SNR and QTECH switches (OBS-3323). +246/−28
• r10647: Improved support for ADVA FSP (OBS-3338). +146/−27
• r10652: Added basic support for VeloCloud SD-WAN devices (OBS-3349). +77/0
• r10654: Added support for Eaton ATS (OBS-2427). +295/−5
• r10658: Improve simplex graph rendering +5/−2
• r10659: Improve some graph rendering +4/−4
• r10707: Updated alerts, contacts related pages. +463/−222
• r10708: Added support for Avtech RoomAlert 32E (OBS-3472). +239/−18
• r10715: Sync DB timezone with php timezone for correct timestamps. +20/−9
• r10719: Added Rocket.Chat notification transport. +128/−3

📋 MIB Updates

• r10043: Updated Netgear MIB files.
• r10047: Updated WTI mib files.
• r10075: Update ROOMALERT3E-MIB
• r10086: Updated Xerox mib files.
• r10110: Updated Dell mib files.
• r10112: Updated Ubiquiti mib files. +1/−1
• r10124: Updated LSI and Supermicro mib files.
• r10145: Updated Geist mib files.
• r10152: Updated Dell, Netgear mib files.
• r10177: Added Transmode (Infinera) mib files.
• r10184: Added Mediatrix mib files.
• r10202: Updated IBM/Lenovo mib files.
• r10210: Updated Edgecore mib files.
• r10217: Updated ZTE mib files.
• r10221: Multiple mib files added, updated, removed duplicates. +43/−56
• r10234: Updated Zyxel mib files.
• r10243: Fixed mib file encoding for ECS4510-MIB.
• r10245: Added Cisco IE1000 and ME1200 mib files.
• r10251: Updated Dell mib files.
• r10262: Updated Nokia (SROS) mib files.
• r10264: Updated MRV mib files.
• r10270: Updated Moxa mib files.
• r10276: Updated Radware mib files.
• r10286: Added Viptela mib files.
• r10309: Added new RAD mib files.
• r10316: Updated DCN mib files.
• r10318: Updated Synology mib files.
• r10354: Updated FSCOM, D-Link and Ruijie mib files.
• r10356: Updated Cisco mib files.
• r10403: Updated mib files for nokia, f5, tripplite, enterasys.
• r10405: Updated radlan, eltex mib files.
• r10429: Updated mib files for tycon and bsd.
• r10431: Updated cisco mib files.
• r10443: Updated Juniper mib files.
• r10467: Updated aruba mib files.
• r10480: Updated Ciena mib files (OBS-3360).
• r10563: Updated Eaton mib files.
• r10566: Updated SmartOptics mib files.
• r10590: Updated hp, aruba mib files.
• r10605: Updated ibm mib files.
• r10609: Updated bdcom mib files.
• r10619: Added lexmark mib files.
• r10700: Updated arris, cisco, paloalto and riverdelta mib files.

🗄️ Database Changes

• r10053: Add probe DB tables
• r10066: Set probe_id to autoincrement.
• r10135: Add lsp table.
• r10136: Add winservices table
• r10680: Fixed primary key index for some tables.
• r10681: Changed db engine for state tables.

🔌 API Changes

• r10347: Add port_id and port_name to address query. Remove correct device data. +5/−3

♻️ Refactoring

• r10460: Renamed function str_contains() to str_exists for not to intersect with php8 function in future. +118/−116

📝 Trivial Changes

• r10002: Updated leaflet jscript to latest.
• r10003: Fixed display leaflet map on MSIE. +14/0
• r10005: Improved support for NTI ENVIROMUX-MICRO. +84/0
• r10006: Added compat fetch js also for FF ESR60 and older. +4/−2
• r10007: Added ArcGIS free geocode api. +67/−2
• r10008: Fixed validate web session User-Agent change. +25/−6
• r10009: Added browser and tz information into about page. +22/−1
• r10010: Fixed discovery sensors on Riello NetMan by ENTITY-SENSOR-MIB. +52/−13
• r10011: Do not discover truthvalue statuses on Cisco devices. Moved detect Sentry version/hardware to definition. +18/−61
• r10012: Fixed display graphs for devices monitored by IPv6 address only. +159/−100
• r10013: Fixed display graphs for devices monitored by IPv6 address only (part 2). +142/−131
• r10014: Fixed display graphs for devices monitored by IPv6 address only (part 3). +10/−10
• r10018: Fixed detect HPE Switches with new firmware versions. +2/−1
• r10021: Fixed format_unixtime() for an older php versions. +8/−3
• r10023: Allow cookie re-auth for ajax requests, until there is a problem with session lost by race conditons. +6/−2
• r10024: Fixed calculate free memory by UCD-SNMP-MIB with new net-snmp versions (OBS-3090). +75/−8
• r10025: Added ability for disable snmpbulkwalk per device in device edit page. +4/−2
• r10026: Fixed display Physical memory by UCD-SNMP-MIB (OBS-3090). +23/−2
• r10027: Try to show correct total memory by UCD-SNMP-MIB. +14/−6
• r10029: Correctly detect "buggy" redhat net-snmp for polling Total memory by UCD-SNMP-MIB (OBS-3090). Reverted this memory calculation as previous for all others (OBS-3100). +28/−55
• r10038: Added detect for new Ubiquiti UniFi Switches (OBS-3096). +17/−8
• r10039: Added discovery VSF members status/memory/cpu by HP-VSF-VC-MIB (OBS-3075). +50/−11
• r10041: Fixed $device var in get_port_rrdindex(). +24/−3
• r10042: Fixed Standby HA Status by STONESOFT-NETNODE-MIB (OBS-3105). +3/−1
• r10044: Improved sensor/counter discovery dynamic scale by definitions. +66/−20
• r10045: Added discovery sensors by NETGEAR-BOXSERVICES-PRIVATE-MIB. +123/−3
• r10046: Migrated os AVAYA Switching to Extreme Networks Switching (OBS-3110). +43/−11
• r10049: Fixed cleanup entity tables in housekeeping. +5/−5
• r10051: Improved polling FDB table by RAPID-CITY in Fabric Connect Mode (OBS-3111). +43/0
• r10057: Improved probes polling with definitions. +215/−24
• r10060: Use definitions in probes modal form. +6/−2
• r10061: Split probes snmp auth definitions and other params. +26/−31
• r10062: Always pass default probe args. +9/−9
• r10065: Improved support for new models of Ubiquiti UniFi Swithes. +66/−18
• r10068: Fixed double escaping in forms on device edit pages (OBS-3114). +17/−17
• r10069: Revert api requiests limit for google geolocation api. +2/−2
• r10073: Try to fix cookie auth trouble. +23/−5
• r10074: Improved discovery IPv6 addresses on Cisco SB switches. +173/−43
• r10082: Fixed discovery incorrect temperature sensor on old firmware CiscoSB devices (OBS-3119). +3/−1
• r10084: Improved discovery sensors without indexes by DeltaUPS-MIB. +418/−264
• r10085: Fixed dbLastID() when update/insert return warnings. +9/−1
• r10087: Improved support for Xerox printers. Added discovery counters by XEROX-HOST-RESOURCES-EXT-MIB (OBS-3116). +72/−1
• r10088: Improved some printer supplies descriptions by Printer-MIB. +4/−3
• r10089: Fixed printersupplies eventlog. +1/−1
• r10090: Migrated discovery DOM sensors by RAPID-CITY to definitions (OBS-3112). +234/−375
• r10093: Split mibs discovery to separate module. +323/−251
• r10100: Correct condition for discovery modules. +1/−1
• r10102: Another try to fix cookie session lost (in ajax requests). +9/−1
• r10107: Do not redirects in ajax requests. +6/−3
• r10108: Fixed fetch with common options by snmp_cache_table() and snmp_cache_oid(). +28/−10
• r10111: Moved detect MIB-Dell-10892 to definition. Migrated detect sensors by MIB-Dell-10892 to definitions. +88/−167
• r10114: Added ability for detect PowerNet-MIB on unix oses. +11/0
• r10115: Improved mibs discovery output. +11/−1
• r10116: Correctly compare mixed values (string and numeric) in test_condition(). Update unittest. +26/−19
• r10117: Improved support for sensors/statuses by MIB-Dell-10892. +126/−12
• r10118: Changed mibs discovery definition, device params now match with "or" condition. +59/−26
• r10120: 3nd edition for discovery mibs definition. +58/−49
• r10121: Added discovery for Dell ArrayManager-MIB. +45/0
• r10123: Split detect scale and limits into separate functions in discover entities from definitions.. +154/−195
• r10125: Moved discovery sensors to definitions by Supermicro and LSI mibs. Added detect hardware/version by SUPERMICRO-SD5-MIB. +185/−89
• r10126: Added fail and pre-fail disks count sensors by LSI-MegaRAID-SAS-MIB. +94/−63
• r10130: Fixed compatability in safe_session_regenerate_id() for php less than 7.1. +16/0
• r10131: Disabled incorrect uptime Oid for CHECKPOINT-MIB. +8/−1
• r10133: Added detect Synology FS-series NAS (OBS-3135). +1/−1
• r10134: Improved support for Huawei iMana devices. Added discovery sensors by HUAWEI-SERVER-IBMC-MIB (OBS-2695). +196/0
• r10137: Set port percent rates to 0 when ifSpeed is zero. +22/−8
• r10138: Disable discovery useless specialEnum sensors by CISCO-ENTITY-SENSOR-MIB. +1/−1
• r10139: Improved detect FSOS (OBS-3137). +4/−1
• r10140: Improved support for Extreme ERS software (OBS-3134). +1/−9
• r10143: Added support for Delta STS devices (OBS-3093). +183/−16
• r10144: Added support for Geist WD15. Moved discovery sensors to definitions by VERTIV-BB-MIB (OBS-3140). +119/−153
• r10146: Added ability timeticks unit conversion for discovery sensors by definitions. +72/−52
• r10147: Partially converted sensors discovery to definitions by PowerNet-MIB (for compatability with net-snmp extension apcupsd-snmp). +244/−72
• r10148: Improved write poller wrapper stats into db. +24/−17
• r10150: Added json payload in get_vars(). +31/−9
• r10154: Fixed discovery sensors for Watchdog devices (OBS-3141, OBS-3145). +34/−8
• r10155: Improved parse snmp indexes in table mode. Added flags for no increase snmpwalk and split index parts by arrow (actually for table snmpwalks). +22/−10
• r10156: Intermediate improvement for vrf discovery, added discover MPLS-L3VPN-STD-MIB. +17/−3
• r10159: Added search ip addresses by type and vrf in api. +17/−2
• r10160: Revert function get_astext() removed by mistake (OBS-3146). +24/0
• r10161: Ignore IPv6 link-local, broadcast addresses by default (while user not exclude it in config). +27/−6
• r10163: Clean HA Mode description by FORTINET-FORTIGATE-MIB. +1/0
• r10164: Forced ports separate walk feature for Alcatel Lucent OS6850 hardware. +34/−28
• r10165: Cleanup sensors description and duplicates by CISCO-ENVMON-MIB. +40/−6
• r10166: Fixed counter row align. +4/−3
• r10167: Fixed discovery sla target ip address by DISMAN-PING-MIB. +1/−1
• r10170: Another fix for DOM sensor association with port in Cisco IOS XR (OBS-3147). +69/−15
• r10172: Additional improvement for dom sensors association with ports on Cisco ASR 9900 platform. +12/−8
• r10173: Improved support for Lancom devices. Added discovery Line statuses by LCOS-MIB. +169/−24
• r10174: Small fix for status by LCOS-MIB. +2/−2
• r10175: Additional improvement for dom sensors association with ports on Cisco ASR 9900 platform (OBS-3147). +11/−4
• r10179: Improvement for dom sensors association with ports on Cisco NCS 5500 platform (OBS-2823). +76/−69
• r10181: Another improvement for dom sensors association with ports on Cisco NCS 5500 platform (this game will never end). +22/−7
• r10183: Fixed sql query for associate multi-lane dom sensors. +1/−1
• r10185: Added basic detection for Mediatrix Gateways (OBS-3153). +70/0
• r10186: Updated bootstrap-select to latest (1.13.12), fixed overlay selects on nav panel.
• r10187: Updated Flight framework to 1.3.8, compat with php 7.4. +19/−12
• r10188: Compatability with php 7.4 in pear libs.
• r10189: Fixed compatability php-cli-tools with php 7.4.
• r10190: Fixed compatibility with php 7.4 in fetch paged ldap users list. +80/−42
• r10191: Fixed glue argument in implode() for compatibility with php 7.4. +58/−28
• r10193: Cleaned sql mode warnings. +5/−1
• r10194: Improved discovery ip addresses on Extreme SLX devices. +37/−5
• r10197: Split device os/os_group matching to function match_discovery_os_group(). +46/−18
• r10198: Improved definitions for polling system and storage params. +53/−4
• r10201: Fixed detect remote ip by alternative http headers. +34/−16
• r10204: Incorrect sensor description (OBS-3167). +1/−1
• r10205: Revert back battery sensor by ELTEK-DISTRIBUTED-MIB, appear in r9915 (OBS-3178). +3/−2
• r10206: Fixed incorrect os definition param for some oses. +5/−5
• r10208: Fixed polling sensors on APC ATS devices (OBS-3168). +1/0
• r10212: Improved format_mac() function. +36/−6
• r10213: Updated ifType rewrites. +89/−89
• r10214: Improved Neighbours discovery by MIKROTIK-MIB. +16/−11
• r10216: Moved rewrite global variables to definitions. +70/−440
• r10219: Allow transformations to clear serial/hardware/... field and drop to next possibility in table; fix(es) RAID controller model correctness on new Areca firmware +10/−3
• r10222: Improvement for some eventlog queries (OBS-3186). +1/−1
• r10223: Added ability for disable/enable ports submodules by os definition. +177/−12
• r10224: Additional broken mibs and modules excludes for ZTE ES devices. +13/−2
• r10227: Added unittest for isnull, notnull test conditions. Small fix. +19/−12
• r10228: Use is_module_enable() for discovery. +17/−78
• r10229: Use is_module_enabled() for poller. +43/−39
• r10230: Improved dbFetchRows() when mysqlnd used. +15/−8
• r10231: Use value -99 dBm when converted 0 Watts for DOM sensors. It is better than use 0 dBm instead (OBS-3200). +24/−7
• r10232: Small ZTE ES os polling improvement. +3/0
• r10236: Additional power sensor value conversion exclude (-9999W to -99dBm) for Extreme device (OBS-3200). +2/−1
• r10237: Fixed detect Zyxel IES serios os (OBS-3189). +3/−3
• r10238: Correctly power sensor value conversion exclude (-9999W to -99dBm) for Extreme devices (OBS-3200). +7/−2
• r10239: Ignore broken serials by ZYXEL-IESCOMMON-MIB (OBS-3189). +1/−1
• r10240: Fixed string_transform() action preg_replace to empty string. +4/−3
• r10241: Ignore (again) broken serials by ZYXEL-IESCOMMON-MIB (OBS-3189). +2/−2
• r10242: Improved support for D-Link DES-1228. +152/−128
• r10247: Improved Extreme XOS version detect (OBS-3210). +3/−2
• r10248: Remove unuseful port transceivers statuses by CIE1000-PORT-MIB. +2/−1
• r10249: Fixed NetApp devices ports polling by NETAPP-MIB. +31/−17
• r10250: Removed "ras" string from ports ignore config. +1/−1
• r10252: Improved support for Dell OS10. Fixed polling FDB table on Dell OS10 (OBS-3213). +137/−38
• r10254: Force device rediscovery if changed sysObjectID && sysDescr (OBS-3216). +18/−5
• r10257: Added discovery current and power sensors by SUPERMICRO-HEALTH-MIB. +6/−4
• r10259: Excluded sensors with zero values by SUPERMICRO-HEALTH-MIB. +1/0
• r10260: Fixed discovery sensors by EQLMEMBER-MIB and EQLVOLUME-MIB. +121/−70
• r10261: Improved powersupply status discovery for Korenix JetNet devices. +20/−17
• r10263: Fixed discovery inventory by TIMETRA-CHASSIS-MIB (OBS-3219). +77/−68
• r10269: Use more version specific Windows os icons. +27/−13
• r10271: Added polling ifAlias for Moxa switch by MOXA-EDSP506E-MIB (OBS-2759). +173/−141
• r10272: Added support PoE sensors for some Moxa switches (OBS-3233). +277/−9
• r10281: Restored some recent changes, removed by mistake. +50/−10
• r10283: Added Synology Disk temperature and VD status (OBS-3227). +53/−7
• r10284: Use longer db field for sensor/status/counter numeric indexes.
• r10285: Cleaned prepend texts before numbers in snmp_fix_numeric(). +5/−3
• r10288: Added discovery sensors for enclosure media error and pre-failure by LSI-MegaRAID-SAS-MIB (OBS-3232). +20/−2
• r10290: Allow non-increasing OIDs on HH3C hardware; allows Observium to fetch FDB tables from these switches +1/−1
• r10291: Fixed nested LDAP/AD groups auth, use configurable group ldap attribute (OBS-3240). +7/−5
• r10292: Added mib definition key for use sensor/status/counter description as rrd index (for cases when entity indexes changed on any hardware remove/insert). +34/−15
• r10295: Fixed writting logs into fifo pipes in poller-wrapper (OBS-2631). +13/−5
• r10296: Fixed generate some additional graphs for IPv6 hosts. +15/−4
• r10298: Fixed detect some sensor classes by FORTINET-FORTIGATE-MIB (OBS-3242). +35/−13
• r10303: Improved parse comma separated vars in url/get requests. +30/−18
• r10304: Fixed display customer graphs with comma separated description. +1/−1
• r10305: Use quotes in js url_from_form() for multiselect form elements. +18/−5
• r10306: API endpoints can be enabled/disabled individually in config (OBS-3247). +123/−23
• r10307: Added memory/processor polling for Moxa EDS switches. Improved support for Moxa EDS-408A. (OBS-3233) +123/−1
• r10310: Fixed storage scale when polling by mib definitions. +10/−11
• r10312: Fixed autodiscovery new devices from neighbours by IP addresses. +49/−22
• r10314: Fixed display port sensors on overview page when port label too short. +10/−5
• r10315: Improved snmp_fix_numeric() for additional case. +2/0
• r10319: Improved detect Synology Rackstation. +112/−62
• r10322: Improved check_device_duplicated(), compare IF-MIB::ifPhysAddress when IP-MIB::ipAdEntAddr unavailable from devices (i.e. Meraki APs). +41/−1
• r10323: Fixed escaping for display syslog tags (OBS-3264). +3/−3
• r10325: Improved parsing some Cisco NX-OS syslog messages. +2/−2
• r10326: Added units bytes/bits in snmp_fix_numeric(). +7/−1
• r10327: Unificate polling/discovery mempools and storages with size units. +35/−43
• r10329: Improved Extreme XOS DOM sensors description. +7/−3
• r10330: Graphs definitions are now allowed to be written to common mib definitions. Fixed Fortigate Sessions graphs, revert back it to graphs as definition. +46/−5
• r10332: Improved support for Mikrotik RouterOS (OBS-2889). +180/−46
• r10335: Fixed string_transform() action preg_replace when pattern passed without delimiters. +17/0
• r10336: Fixed discovery ip addresses with zero ifIndex. +2/−2
• r10337: Changed Hikvision Cameras main graphs. +2/0
• r10338: Improved compare_devices_oids() by use secondary device db values if possible. +108/−6
• r10339: Cleanup stale ip address entries by housekeeping (OBS-3280). +36/−8
• r10341: Correctly detect devices max id value in housekeeping staledb. Added dbShowNextID() for get next auto increment id for table. +34/−7
• r10342: Fixed generate entity associations with in/notin condition with values lists. +12/−3
• r10343: Improved discovery Datadomain disks (OBS-3283). +75/−19
• r10344: Fixed PSU disabled status by S5-CHASSIS-MIB (OBS-3282). +1/−1
• r10345: More accurate generate entity associations with in/notin condition with values lists. Do not convert when values already array. Added common function get_var_csv(). +44/−39
• r10346: Added ifConnectorPresent and ifTrunk as port attribs for Groups/Alerts entity match. +4/−2
• r10348: Added discovery cmd option (-a) for force update Alerts/Groups tables. Improved display which tables updated in cli. Fixed update Alert rules when Group updated in WUI. +81/−35
• r10350: Improved selecting params in search form for devices page. +39/−15
• r10352: Fixed search for all search patterns in html_highlight(). +2/−1
• r10355: Improved support for Ruijie RGOS. +167/−36
• r10358: Improved hardware detection for H3C (OBS-3297). +55/−49
• r10359: Fixed display customers graphs. +27/−20
• r10360: Exclude temperature sensors on VMs by LM-SENSORS-MIB. +10/−3
• r10362: Fixed Fortigate Sessions graph. +18/−34
• r10364: Use more corect IOS-XE version compare for OBS-3026. +3/−3
• r10365: Fixed update deleted sensor entries with case sensitive changes (OBS-3298). +9/−1
• r10366: Improved support for Qnap QTS. +103/−20
• r10368: Improved some vm and bgp event logs (OBS-3302). +3/−3
• r10369: Disabled separate walk feature for Juniper EX Switches. +167/−105
• r10370: Improved generate links with ip addresses. +55/−18
• r10372: Added function list_to_range() inverse for range_to_list(). +55/0
• r10373: Fixed incorrect mempool_hc flag when discovery mempools by definitions. +4/−2
• r10375: Fixed linkify uncompressed IPv6 addresses (OBS-3305). +19/−12
• r10376: Added function generate_syslog_row(). Improved linkify ports for Extreme XOS (OBS-3304). +240/−169
• r10377: Keep original port string when linkify it in syslog (OBS-3304). +3/−2
• r10378: Do not exclude IF-MIB by default in enterprise_tree_snmpv2 os group. +19/−7
• r10380: Improved vmware os version detect on vCenter Server (OBS-3307). +76/−34
• r10382: More accurate display si formatted sensor values. Discover definition based sensor first (before include based). +60/−34
• r10383: Allowed to pass validate key as string in discovery_check_if_type_exist(). +53/−39
• r10384: Removed redundant argument in discovery_check_if_type_exist(). +12/−15
• r10387: Converted some environmental sensors by PowerNet-MIB to discover_sensor_ng() for correctly cache oids in polling. +48/−22
• r10388: Disabled snmp bulk for Egnite Querx. +1/0
• r10389: Added devices form element for show/hide disabled. +30/−6
• r10390: Try to fix ldap recursion in nested group with AD (OBS-3310). +9/−2
• r10391: Added param for custom data attributes in generate_tooltip_link(), generate_mouseover_link() and get_icon(). Added common function generate_html_attribs(). Function overlib_link() renamed to generate_mouseover_link() (with backward name compatibility). +85/−28
• r10393: Fixed detect sensors for APC InRow units (OBS-3312). +2/−1
• r10394: Fixed sensors numeric oids for APC InRow devices. +61/−42
• r10395: Fixed polling ipmi statuses (OBS-3187). +63/−52
• r10396: Disabled by default IPMI/agent discrete statuses, while many false positives (OBS-3315). +44/−7
• r10399: Improved display check_snmp probes. Added probe description field in add probe action. +89/−25
• r10401: Fixed Battery voltage scale by XPPC-MIB. +335/−258
• r10402: Improved hardware/version detect for Egnite Querx. +2/0
• r10407: Removed incorrect multi-lane DOM sensors by RADLAN-PHY-MIB (OBS-3326). +14/−1
• r10408: Improved discovery processor/sensors by UBNT-AirMAX-MIB. +43/−10
• r10409: Updated min-resolution in css for hi-res displays (OBS-3318).
• r10410: Improved discovery power supply statuses for HP/Aruba ProCurve (OBS-3084). +68/−2
• r10411: Improved SROS version detect (OBS-3333). +7/−6
• r10412: Additional improvement for SROS version detect (OBS-3333). +3/−2
• r10414: Improved unit_string_to_numeric(). Unificate detect unit prefixes (M/G/E/Z, etc) and units (byte/bit/ps, etc). Excluded versions string (and other without valid units) from conversion. Added units test related to versions compare. +76/−74
• r10415: Added ability for use test conditions in model os definitions (is os version compare). For Juniper EX switches ports separate walk feature disabled for fw version greater than 15.1R5.5. +82/−37
• r10421: SLA description generated in humanize_sla(). +20/−4
• r10422: Unified quick search results. +55/−44
• r10423: Improved hardware/version polling for Ubiquiti UniFi APs on latest firmwares (OBS-3307). +7/−6
• r10424: Added common actions (age/uptime, escape) to string_transform(). +22/−1
• r10425: Added ifAlias polling by VIPTELA-OPER-VPN (OBS-3331). +13/−7
• r10426: Added discovery sensors by ELTEX-MES-HWENVIROMENT-MIB (OBS-3339). +74/−10
• r10427: Fixed associate ifIndex in port definition by oid. Improved ip-address definitions ifIndex associations. +54/−14
• r10428: Fixed ifAlias ports polling by VIPTELA-OPER-VPN (OBS-3331). Added discovery ip-addresses by VIPTELA-OPER-VPN. +40/0
• r10432: Skip empty DOM sensors on Cisco NCS platform by CISCO-ENTITY-SENSOR-MIB (OBS-3335). +83/−3
• r10434: Slightly improved display entPhysical inventory. +136/−56
• r10435: Improved inventory discovery by ELTEX-MES-PHYSICAL-DESCRIPTION-MIB (OBS-3339). +75/−11
• r10436: Prefer ports sorting by ifIndex in entPhysical inventory. +1/−1
• r10437: Updated bootstrap select js to latest.
• r10439: Added detect for Barracude ESG (OBS-3294). Added sensors discovery by BARRACUDA-BMA-MIB (OBS-2679). +166/−38
• r10440: Fixed escaping port_label/port_label_short (OBS-3289). +76/−59
• r10441: Remove CPU from hrDevice rewrite cleaning, as some sensors are simply called 'CPU'. Please let us know if this has unintended side-effects. 0/−1
• r10442: Replaced usage function rewrite_hrDevice() with rewrite_entity_name(). Improved rewrite_entity_name() (convert to definition, added entity_type and escape args). +225/−173
• r10444: Removed unnecessary functions rewrite_junos_hardware() and rewrite_junose_hardware(). Hardware detect for Juniper devices converted to sysDescr or definitions based. +360/−216
• r10445: Fixed detect FreeNAS/TrueNAS for ver 11.3+ (OBS-3350). Added discovery zpool statuses by FREENAS-MIB. +218/−142
• r10446: Added discovery flash storage by FIBERSTORE-MIB. +16/0
• r10450: Updated leaflet and leaflet-realtime to latest. Fixed z-index for map zoom buttons.
• r10451: Fixed polling uptime on Netgear M series. Discovery sensors by NETGEAR-BOXSERVICES-PRIVATE-MIB for all stacked units. +57/−11
• r10452: Updated UserAgentParser library to latest. +23/−16
• r10453: Updated Mobile Detect Library to latest.
• r10454: Ref library is synchronized with latest.
• r10455: random_compat library has been updated to the latest.
• r10456: Uuid library has been updated to 3.9.3..
• r10457: Used pear libraries has been updated to the latest. +4/−2
• r10458: Fixed process port_label for some port names on TimOS (OBS-3354). +6/−5
• r10459: Unescape "ZERO WIDTH SPACE" html entity. +13/−5
• r10463: Fixed detect unifi-switch os for new firmware versions (OBS-3355). +4/−3
• r10464: Detect version, hardware for Innovaphone. +6/0
• r10466: Added quick search devices by vendor field. +2/−2
• r10468: Set syslog priorities based on tags for Mikrotik devices. +21/−11
• r10469: Use common, more complex test conditions for hardware/version/etc mib definitions. +12/−5
• r10470: Improved discovery sensors by UPS-MIB for Mikrotik devices. +46/−31
• r10473: Added snmp error code for unknown host reason. +7/−4
• r10474: Fixed some code warnings. Added small helper function for print html table from row. +64/−7
• r10479: Improved check duplicate devices, use snmp noincrease and nobulk flags when compare unknown devices. Fixed add Eltek devices. +19/−8
• r10481: Added some base and debug config variables to WUI settings. Added common get_time() function for gent named time (instead use static config variables). +169/−3
• r10482: Restore mistakenly removed probe output definitions. Added output format for ping probe. +17/−9
• r10483: Generate rancid script limited with current poller_id (by default). For fetch all devices, use -a argument. (OBS-3366) +13/−4
• r10484: Fixed detect fqdn sysname in check_device_duplicated(). +13/−13
• r10486: Improved detect Eaton (MGE) Powerware UPS with memory leak trouble (OBS-3362). +160/−93
• r10487: Use ifType instead ifDescr for Eaton Powerware with memory leak trouble. +10/−6
• r10489: Force snmp HEX to UTF8 conversion in printer supplies descriptions by PRINTER-MIB. +3/−4
• r10490: Fixed autodiscovery db schema for mysql version less 5.6.5 (OBS-3373). Set minimum required version as mysql 5.6.5 or mariadb 10.0. +5/−2
• r10491: Added config option http_ip_version for ability force resolve names with specified IP version. Actual in environments with dual stack for notifications. +67/−1
• r10492: Do not use by default http ip version force. +1/−1
• r10497: Detect MySQL/MariaDB name in get_versions(). +37/−11
• r10500: Message when version is up to date. +9/0
• r10502: Revert escaping for short port links in display ARP entries. +2/−3
• r10503: Incorrect condition in match allowed ip nets for autodiscovery (OBS-3376). +1/−1
• r10504: Show only active neighbours on ports map page. +10/−5
• r10505: Do not spam eventlog if neighbours deleted. +5/−2
• r10506: Improved detect remote ip for LLDP neighbours. Fixed already found autodiscovery remote hostname by MIKROTIK-MIB. +93/−23
• r10508: Improved detect remote hostname/port in some cases by LLDP-MIB. Fixed escaping for display neighbours (OBS-3369). +51/−32
• r10510: Split Alcatel-Lucent os definitions to separate file. +516/−503
• r10512: Fixed detect Cisco Meraki APs. Improved detect remote Meraki meighbours by CISCO-CDP-MIB. +283/−180
• r10514: Fixed update device os specific icon. +16/−6
• r10520: Renamed xdp ignore hostname/platform config options. Ignore more IP phone platforms by autodiscovery. +71/−27
• r10521: Fixed rare case convert IP address in hex2ip(). +8/−2
• r10522: Force fetch neighbours IP addresses as hex by CISCO-CDP-MIB, for correctly detect addresses. +9/−4
• r10533: Fixed discovery dBm RX Power by RADLAN-PHY-MIB. +8/−8
• r10534: Updated external documentation links. +19/−17
• r10537: Updated bootstrap-show-password library to latest. Prevent browser password manager popups to save password (where not required). +10/−3
• r10538: Updated bootstrap-select library to latest.
• r10540: Polling Meraki serial. +29/−13
• r10541: Fixed fetch empty roles entity permissions (OBS-3380). +19/−9
• r10542: Another fix for memory leaked port labels on Eaton Powerware (OBS-3362). +11/−8
• r10544: Revert redhat workaround for memory calculation in UCD-SNMP-MIB (OBS-3090). +26/−14
• r10552: Revert docs links. +3/−3
• r10553: Fixed discovery Power Supply by CPQHLTH-MIB. +1/−1
• r10554: Fixed sql comments. Added ability for force db schema update. +28/−18
• r10555: Fixed css labels.
• r10556: Fixed discovery neighbours by MIKROTIK-MIB when ifIndex larger than 9 (OBS-3390). +3/−1
• r10557: Fixed get_var_csv() for safe restore commas in array vars. +28/−18
• r10560: Improved truncate() in wui view. Slightly improved neighbours view. +60/−22
• r10561: Do not discover power sensors by CPQHLTH-MIB when not avialable by hardware. +5/−2
• r10562: Improved discovery current and battery sensors for Eaton UPS with new firmware (OBS-3393). +175/−56
• r10564: Added ability for quick search ports my mac address. +19/−8
• r10565: Added search ports by mac address on general ports page. +65/−50
• r10568: Fixed display device inventory in some cases. +8/−1
• r10569: Added definitions for polling os params by ENTITY-MIB. +75/−6
• r10570: Migrate polling os metatypes for cisco devices by ENTITY-MIB to definition. +31/−30
• r10571: Improved cisco os polling db query. +6/−5
• r10572: Migrated polling os metatypes for wlc os to definitions. +26/−21
• r10573: Migrated polling os metatypes for ibmnos and lenovo-cnos to definitions. +68/−85
• r10574: Fixed remove deleted inventory entries. +15/−16
• r10575: Migrated polling os metatypes for slx and nos to definitions. +28/−40
• r10576: Migrated polling os metatypes for hpuww and fabos to definitions. +35/−33
• r10577: Fixed display device inventory with non common entPhysicalContainedIn. +14/−12
• r10578: Migrated polling os metatypes for arubaos-cx, hh3c and h3c to definitions. +53/−99
• r10579: Migrated polling os metatypes for vmware, qnap, ciscosb and cisco-ie to definitions. Added helper function is_valid_serial(). +125/−128
• r10580: Migrated polling os metatypes for acme to definitions. Done. +9/−63
• r10581: Fixed polling os metatypes for nxos. +1/−1
• r10582: Fixed meraki group definition. +3/−3
• r10583: Function get_device_icon() support dark mode. Improved icons for cisco, juniper and mikrotik for dark mode. +43/−29
• r10584: Changed warning message for skip icmp ping. +4/−2
• r10585: Fixed polling os hardware in rare cases by sysName. Improved caching in get_entity_attribs(). +69/−47
• r10589: Updated some os/vendor icons for dark mode.
• r10591: Updated macos icons. Improved MacOS version detect. +82/−23
• r10592: Fixed associate neighbours local port on Dell OS10 (OBS-3406). +24/−21
• r10593: Ignore db update errors on force argument. +4/−3
• r10595: Prevent double escape on storage overview (OBS-3410). +10/−10
• r10596: Clean escaped quotes in syslog message (OBS-3412). +7/0
• r10597: Improved support for HP MSA 2040 (OBSENT-39). +35/−8
• r10598: Fixed discovery status utf8 description for Printer-MIB::prtCoverDescription. +6/−2
• r10599: Fixed jetdirect os definition (OBS-3416). 0/−11
• r10600: Fixed associate device id by ip in syslog collect (OBS-3415). +26/−19
• r10601: Do not show inactive neighbours on port detail (OBS-3406). +34/−21
• r10602: improved detect QNAP QES devices (OBS-3414). +6/0
• r10603: Improved display software versions when too old (below minimum requirements). +126/−29
• r10604: Correctly calculate last changed for neighbours by CISCO-CDP-MIB. +7/−6
• r10607: Improved statuses for Dantherm CC3000 (OBS-3392). +5/−4
• r10608: Ignore incorrect power supply temperature sensors by POWERSUPPLY-MIB (OBS-3403). +2/0
• r10611: Fixed discovery incorrect neighbour last changed by CISCO-CDP-MIB. +5/−2
• r10612: Fixed sensors scale for BDCOM (OBS-3400). +55/−25
• r10613: Revert uptime hack (as incorrect) for bdcom devices. +1/−7
• r10614: Force fetch target ip addresses as hex string for ip sla by CISCO-RTTMON-MIB (OBS-3424). +7/−8
• r10615: Ignore alert event for sensor/status when measured port is Administratively down. +54/−18
• r10616: Improved polling BDCOM devices (OBS-3400). +3/−1
• r10617: Spelling error. +2/−2
• r10620: Improved hardware/version detect for lexmark, samsung and oki printers. +29/0
• r10632: Revert back accidentally deleted default option. +1/−1
• r10633: Fixed delete dashboad confirmation. +39/−9
• r10634: Improved detect Axis Dom Camera (OBS-3450). +59/−47
• r10635: Fixed compatibility collectd graphs with dark mode (OBS-3447). +33/−22
• r10636: Fixed Sophos MIB definition with v18 (OBS-3451). +3/−3
• r10639: Prevent pass unescaped sql params (V01-04). +3/−1
• r10640: Additionally quote values with spaces (V01-04). +8/−2
• r10641: Additional checks for auth variables. +46/−41
• r10648: Improved function dashboard_exists(). +4/−1
• r10651: Added polling missing iftype for ADVA devices (OBS-3338). +6/−1
• r10653: Fixed display IPSEC tunnels. +8/−10
• r10656: Reset possible old (removed) geocoding api in config to default. +61/−38
• r10657: Fixed display raw config dump. +23/−24
• r10660: Sort entity groups by type in nav menu. +48/−25
• r10661: More smart nesting for entity groups menu. +7/−1
• r10662: Added option for collect poller snmp errors. +40/−24
• r10664: Updated support for Geist R-Series PDU (OBS-3458). +83/−16
• r10666: Fixed minimum graph point for probes. +1/0
• r10667: Highlighting not installed probes when adding. +33/−22
• r10677: Fixed temperature graph descr. +2/−2
• r10678: Rearranged navbar entry for user profile. +7/−7
• r10682: Fixed discovery ghost vlans by CISCO-VTP-MIB. +9/−7
• r10683: Reorganized some os definitions. +94/−65
• r10691: Clean themes navbar in CE. +42/−18
• r10692: Fixed function is_alpha(). +1/−1
• r10694: Improved discovery sensors for Enlogic PDU with ENLOGIC-PDU2-MIB (OBS-3464). +216/−125
• r10695: Fixed php deprecated warning. +6/−6
• r10696: Fixed energy scale by ENLOGIC-PDU-MIB. +1/−1
• r10697: Added config option proxy_fulluri for some proxy types (OBS-3469). +9/−1
• r10698: Fixed detect vendor for Aten devices (OBS-3468). +37/−26
• r10699: Improved discovery Overall Status for HP SAN (OBSENT-59). +43/−8
• r10701: Slightly improved generate_form(). +25/−15
• r10702: Added dbSetVariable(). +26/−7
• r10704: Synced all entities metrics definitions. +123/−44
• r10705: Update alerts db schema.
• r10709: Updated syslog notifications message tags. +104/−78
• r10710: Improved associate alert/group entities by compressed addresses (OBS-3071). +48/−26
• r10711: Added more string_transform() actions. +17/0
• r10712: Improved detect hardware for Extereme SLX devices (OBS-3470). +6/−2
• r10713: Improved notification templates. +12/−12
• r10714: Update MapQuest geo api definition. +2/−2
• r10716: Do not use syslog timestamp if received time have different timezone. +16/−10
• r10717: Improved notification message tags for alert reminders (OBS-2974). +13/−4
• r10718: Added alert notifications message tag. +9/−3
• r10720: Added Rocket.Chat notification transport by webhooks. +29/−2
• r10722: Update CE navbar. +1/−1
• r10723: Update CE include. +5/−1
• r10725: Improved Telegram notification template. +5/−1
• r10726: Improved detect device duplicates for Hikvision cams. +19/−3
• r10727: Improved support for Hikvision DVR. +47/−1
• r10728: Fixed discovery processor name by CISCO-PROCESS-MIB. +7/−5
• r10729: Fixed regex in os definitions. +5/−5

📚 Library Updates

• r10094: Updated UserAgentParser lib for correctly detect MS Edge (Chromium based).

🧹 Code Cleanup

• r10063: Moved device functions from common to entities. Removed unused device functions. +206/−196
• r10064: Removed unused file. 0/−923
• r10072: Clean up some erroneous comments +3/−3
• r10092: Remove unused files. +1/−37
• r10113: Fixed license year. +2/−2
• r10132: Undebug some auth messages. +11/−2
• r10151: Restored stale db cleanup deleted by mistake. +5/0
• r10168: Removed curly brace syntax for accessing array elements and string offsets.
• r10253: Just additional code information. +2/−1
• r10255: Remove devel mistake. 0/−3
• r10349: Replaced some colour global vars with constants. +155/−156
• r10461: Moved port/device specific functions from common to entity specific place. +210/−132
• r10517: More CSS cleanups
• r10519: Remove unused variables and function discover_link(). 0/−17
• r10525: Moved/renamed function isDomainResolves() to is_domain_resolves(). +20/−15
• r10535: Year. +1/−1
• r10545: Removed multiple CLEANME code parts. +19/−194
• r10649: Removed some old unused functions and clean code. +23/−73
• r10655: Rearranged some os definitions. +192/−197
• r10703: Code cleanups. +18/−6
• r10730: Synced tests with latest changes. +3/−2
• r10731: Update PHPCompatibility def. +6/0

🚧 Development

• r10663: Added ability for skip run process checking. +54/−10

📦 Other Changes

• r10015: Derp. +4/0
• r10016: Fixed display graphs for devices monitored by IPv6 address only (part 4, last). +132/−130
• r10031: [undebug] undebug +2/−2
• r10180: derp. +1/−1
• r10225: derp. 0/−1
• r10392: [TRIVIAl] Slightly improved probes display. Added probe_event alert metric for unification. +51/−34
• r10594: derp. missed array element. +1/−1
• r10721: derp. +1/−1
• r10724: derp 0/−1
• r10080: Remove old services files. 0/−151
• r10101: Remove old check-services script 0/−90
• r10096: DERP
• r10340: Revert check for max device id in clean stale db. +2/−2
• r10099: Added ability for extended debug for auth lost. +14/0
• r10182: Additional debug for multi-lane dom sensors. +4/−8
• r10153: Added definition concept for parsing/display probes output. +31/−1
• r10438: Added Emoji icons definitions. Added get_icon_emoji() for convert emoji named to emoji html entities. In get_icon() can pass emoji in common name format (ie :smile:). FYI: do not ask for what :smile_cat: +2,068/−3
• r10226: Add isnull/notnull operators +10/0
• r10301: Merge stable changes to trunk. +181/−4
• r10673: Update actions to handle themes +58/−17
• r10693: CSS Update